inline drip irrigation system

inline drip irrigation system

The running trail of a inline drip irrigation system is parallel to the length side of the field ,the water flow through the control tower to the edn of the linear.
One linear can cover 92% to 98% of a square of cectangular field.The span is same sa center pivot.
The max length of linear is relative with the way of water delivery and power supply as well as guidance.

Product Details

Description

The inline drip irrigation system generally consists of the first hub, tubing and dripper.

1. The first hub: including pumps (and power machines), fertiliser tanks, filters, control and measuring instruments. Its role is to pump, fertilize, filter, and send a certain amount of water to the main pipe at a certain pressure.

2. Pipeline: including dry pipe, branch pipe, capillary pipe and necessary adjustment equipment (such as pressure gauge, gate valve, flow regulator, etc.). Its function is to uniformly deliver pressurized water to the dripper.

3. Dripper: Its function is to make the water flow through the tiny pores, forming energy loss, reducing its pressure, and letting it drip into the soil in a drip manner. The dripper is usually placed on the surface of the soil and can also be protected by shallow burial.

The running trail of a inline drip irrigation system is parallel to the length side of the field ,the water flow through the control tower to the edn of the linear.One linear can cover 92% to 98% of a square of cectangular field.The span is same sa center pivot.The max length of linear is relative with the way of water delivery and power supply as well as guidance.

10.jpg

Features

Full wrap around leg attachment brackets at each drive unit provide added strength.Heavy duty gussets eliminate pipe twist.

Special design of truss rod and basement ensure the structure in the control and avoid control and avoid shock strength to the whole span.

11.5m pipe ensur the less possibility of water leakage than the 6.5m pipe, while save the huge cost of installation or diassemble.

Bolt and-covket hitch allows movemtent in all directions,side to side,up to down,and rotation to minimize stress on the piipeline while ensuting maximum flexibility.One piece forged steel ball unsures long term durability.

7.jpg

Center Drive by UMC

Aluminum finned housing is held in place with corrosion-resistant and provide range 20'Fcooler for a longer life

A water tight seal between housing component to protect motor.

Hot protector with automatic reset function.

Pinion gear are integral with motor shaft and heat treated to ensure longer life.

All the electric components are sealed with insulated suit to keep water out.

All the components are manufactured under

Insulation Grade F.

TFE protection suit are installed in magnetic wire and terminal to the motor.

Gearbox by UMC

Bigger input and case hardened to ensure long trouble-free life.

Stainless steel expansion section ensure noncorrosion and allow oil expand operation.

High strength cast iron bull gear provide the highest load capacity and longest life forextreme conditions

50:1 speed reduction (turbine: worm)

Double input oil seal

Heaviest gearbox housing is designed morematerial in high stress area to distribute loadsmore evenly.

High stessed steel worm and output roller with protection sleeve.

Input rol is sealed with anti- dust and anti-UVring.

OUV-anti rubber ring on input bearing effetively avoid dust in.

Expansion film of bellow model provide robber diaphragm, allow oil to expand and contractduring operation.

Hot Tags

Related Products

Inquiry