Diesel Engine Water Pump
It can be used as a general clean water self-priming pump without the need for a bottom valve, without the need to pump water; it can also suck dirt containing large solid blocks and long fibers.
The diesel engine water pump combines self-priming and non-blocking sewage discharge. It can be used as a general clean water self-priming pump without the need for a bottom valve, without the need to pump water; it can also suck dirt containing large solid blocks and long fibers. Sediment waste minerals, manure treatment and all engineering sewage materials completely reduce the labor intensity of workers. In addition, it is easy to use, move and install, with little maintenance and stable performance. In combination with the mobility of the diesel engine, there is no need to quote the wire, and the flexibility of the pump is improved.
1.Vibration proof design prolongs the working life.
2.Powered by our self made OHV air cooled diesel engines.
3.Low noise and low fuel consumption.
4.High pressure casting aluminum alloy for pump body.
5.One year warranty with free spare parts.
6.Optional electric start
1. Make a concrete foundation according to the basic dimensions and at the same time bury the anchor bolts.
2. Check the diesel engine water pump and motor before installation. All parts should be intact, and there should be no debris in the self-priming pump.
3. Place the unit on the foundation, place the pair of wedge pads between the bottom plate and the foundation, and adjust the level of the pump by adjusting the wedge pads. After adjusting, tighten the anchor bolts.
4. The suction and discharge lines of the self-priming pump should have a bracket and cannot be supported by a pump. The diameter of the inlet and outlet pipes should be consistent with the diameter of the inlet and outlet of the pump.