high pressure water pump

high pressure water pump

The high pressure water pump is an energy-saving pump product developed after absorption, digestion and improvement based on relevant technical data at home and abroad.
The pump is a self-priming centrifugal pump, which has the advantages of compact structure, convenient operation, stable operation, convenient maintenance, high efficiency, long service life and strong self-priming capability.

Product Details

Description

The high pressure water pump is an energy-saving pump product developed after absorption, digestion and improvement based on relevant technical data at home and abroad. The pump is a self-priming centrifugal pump, which has the advantages of compact structure, convenient operation, stable operation, convenient maintenance, high efficiency, long service life and strong self-priming capability. There is no need to install the bottom valve in the pipeline. It is only necessary to keep the quantitative liquid in the pump before the work, so the piping system is simplified to improve the working conditions.

Features

1.Vibration proof design prolongs the working life.
2.Professional manufacture with R&D CAPACITY.
3.Low noise and low fuel consumption.
4.High pressure casting aluminum alloy for pump body.
5.One year warranty with free spare parts.
6.Optional electric start

Specification

TypeDiesel Pressure Pump
PumpModelGF40DP(E)GF50DP(E)
Inlet40mm(1.5'')50mm(2'')
Outlet1''2.1,5''12''1
Capacity(m³/hr)17(at 35m head)23(at 30m head)
Self-peiming time(s/4m)3030
Suction head(m)/(feet)6/19.76/19.7
Max.discharge head(m)/(feet)50/196.955/180.5
Impeller numbersinglesingle
EngineModelGF178FA(E)GF178FA(E)
Type4-Stroke,air cooled diesel4-Stroke,air cooled diesel
Max.output(hp/rpm)5.0/36006.0/3600
Fuel tank caoacity(L)/(US.Gal)3.5/0.923.5/0.92
UnitNet weight(kg)/(Ibs)47/103.550/110.3

High pressure water pump

1. When you are ready to work, press the start button and start it normally under normal conditions. If the start is unsuccessful, you must wait until the starter armature is completely still before you can start the next time.

2. Each start-up time should not exceed 5 seconds, and the interval between secondary starts should be greater than 2 minutes.

3. When it cannot be started several times in a row, it should be checked, diesel engine, battery and wiring, etc., and then restarted after troubleshooting.

4. When the diesel engine is running normally, the pressure of the pump should be checked in time. If it is not reached, the maintenance worker should be notified in time.

Hot Tags

Related Products

Inquiry